[. . . ] C A CANADA: 1-800-807-6777 TABLE OF CONTENTS Congratulations on your purchase and welcome to the Whirlpool Brand family of high-quality appliances. Your new Whirlpool® French Door Refrigerator combines advanced cooling technology with simple operation and high efficiency. Each appliance that leaves our factory is inspected thoroughly to ensure that it is working properly. 5 Please read the Use and Care Instructions in this guide before operating your new refrigerator. [. . . ] Disabling Sounds ■ To turn off control and dispenser sounds, press and hold ICE/ WATER and MEASURED FILL at the same time for 3 seconds. To turn all sounds back on, press and hold ICE/WATER and MEASURED FILL at the same time for 3 seconds again. – Showroom Mode This mode is used only when the refrigerator is on display in a retail store. If you unintentionally turn on Showroom mode, the word “Showroom” will light up on the display. Exit Showroom mode by pressing and holding LIGHT and LOCK at the same time for 3 seconds. Vacation Mode In Vacation Mode, the freezer will defrost less often to conserve energy. – To turn on Vacation mode, press the OPTIONS button to access the Options menu, then press LOCK, under Vacation, to activate the feature. When the feature is on, the Vacation icon will appear on the dispenser display screen as shown. Water and Ice Dispensers IMPORTANT: ■ Allow 3 hours for the refrigerator to cool down and chill water. – ■ The dispensing system will not operate when either the refrigerator door or freezer drawer is open. 21 REFRIGERATOR USE Flush the Water System Air in the water dispensing system can cause the water dispenser to drip. After connecting the refrigerator to a water source or replacing the water filter, flush the water system. Flushing the water dispensing system forces air from the water line and filter and prepares the water filter for use. NOTE: As air is cleared from the system, water may spurt out of the dispenser. Using a sturdy container, depress and hold the water dispenser paddle for 5 seconds. Once water begins to flow, continue depressing and releasing the dispenser pad (5 seconds on, 5 seconds off) until a total of 3 gal. Calibrate Measured Fill Household water pressure may affect the accuracy of the Measured Fill feature. So, for optimum performance of your water dispenser, you must first calibrate Measured Fill. Place a sturdy measuring cup (1 cup size) on the dispenser tray centered in front of the water dispenser paddle. Press and release the water dispenser paddle, as needed, to dispense water to the 1 cup fill line. NOTE: If overfilling or spilling occurs, discard the water and press ICE/WATER “Back” to restart the calibration process. When 1 cup of water has been correctly dispensed into the measuring cup, press the MEASURED FILL button under the word “Confirm” to confirm the calibration. [. . . ] Based on the use of Cryptosporidium parvum oocysts Fibers greater than 10 um in length ® NSF is a registered trademark of NSF International. €† † 38 WARRANTY WHIRLPOOL CORPORATION MAJOR APPLIANCE WARRANTY LIMITED WARRANTY For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter “Whirlpool”) will pay for Factory Specified Parts and repair labor to correct defects in materials or workmanship that existed when this major appliance was purchased. This limited warranty is valid only in the United States or Canada and applies only when the major appliance is used in the country in which it was purchased. Proof of original purchase date is required to obtain service under this limited warranty. [. . . ]